Search
Name
Keyword
Part#
Price -
 
    

HomeProductsEvaluation BoardsSAM9 series


More...		  

 EB-SAM9G45 Evaluation Board

        
  Part#: EB-SAM9G45 Count: 0
  U/P(US$): 320   In Stock Accept OEM/ODM
  
  Overview
With LCD Without LCD
The ATMEL EB-SAM9G45(Obsolete name EB-SAM9G45) evaluation board is a new released compact board produced by Embest in 2010, based on the high-performance eMPU ATMEL AT91SAM9G45 which runs at up to 400MHz and with 64KB ROM and 64KB SRAM on-chip memories. Besides providing plenty of external memories on board, the EB-SAM9G45 has exposed a lot of functional peripherals including UARTs, hp USB host, hp USB device, Ethernet, SD/MMC, Micro SD, TFT LCD, JTAG, User extension interfaces, key buttons and IIS Audio Input/Output Jack. Meanwhile, it supports Linux2.6 and WinCE6.0, and provides free board support packages (BSPs) of these two OS. The plenty of example programs accompanying with the CD-ROM of the board will make you easily evaluate the functions of the AT91SAM9G45 processor.
 
  AT91SAM9G45 Microcontroller
 
Click to see large picture
 
ATMEL's SAM9G45 is a high-performance eMPU with the right peripheral mix and performance characteristics to make it the ideal solution for main powered, cost-sensitive industrial applications such as industrial & building control, HVAC, POS terminals, alarm systems, printers and medical.
  • High-speed Connectivity and Intelligent User Interfaces
    Combines 100 Mbps+ data rates on multiple high-speed peripherals including HS USB, Ethernet 10/100, SDIO/SDCard, MMC with advanced intelligent User Interfaces (LCD, Camera, Touch screen and audio interfaces).
     
  • High Performance Data Speedway
    Features a processor clock running at 400 MHz and a high data-bandwidth architecture based on a 12-layer bus matrix with 37 DMA channels. Dual External Bus Interface supporting distributed on- and off-chip memory.
     
  • Next-generation Memories
    Offers DDR2 and NAND Flash support, in addition to SDRAM and NOR Flash, with boot from NAND Flash, SDCard, DataFlash® or serial DataFlash.
     
  • Low Power, Low Cost
    Only 350µW/MHz at 400 MHz operation and 8µA backup mode. 3.3V IOs eliminate the need for external level shifters.
 
  Hardware Features
 
  • Support Linux2.6 and WinCE6.0 OS, with free relevant board support packages (BSPs)
  • Includes one 4.3" QVGA 480x272 LCD panel with Resistive touch screen
  • CPU: Atmel AT91SAM9G45 (based on ARM926EJ-S Core), 400MHz
  • On-chip memory: 64KB ROM & 64KB SRAM
  • External memory: 256MBNandFlash, 2MB NorFlash, 4MB DataFlash & two 64MB DDR2 SDRAM
  • 4 x UART interfaces
  • 1 x UART DBGU interfaces
  • 1 x high-speed USB Host Port
  • 1 x high-speed Host Device Port
  • 1 x JTAG Debug Interface
  • 1 x 10/100 Ethernet interface
  • 1 x TFT LCD interface
  • 1 x SD/MMC card interface
  • 1 x Micro SD card interface
  • 1 x IIS Audio output port
  • 1 x IIS Audio input port
  • 2 x User buttons
  • 1 x Wake-up button
  • 1 x Reset button
  • 1 x User LED
  • 1 x Power LED
  • 1 x 60 I/O Pins User Extention Interface
  • Power supply: 5VDC from connector, with back-up battery on board
  • Working temperature: -10 to 70 Deg C
  • Dimension: 120mm x 90 mm
 
 Software Features
 
We provide more than 20 source code test programs and project files under Keil uVsion (MDK-ARM) to evaluate the functions of the ATMEL AT91SAM9G45 eMPU processor, following are listed some test programs:
Item Description Delivery
audio Read the file from the SD card and then play WAV source
LCD Display two picture in LCD source
LCD slideshow Display the picture which transmitted over USB in LCD source
Nandflash Read and write NandFlash source
Norflash Read and write NorFlash source
Filesystem Make the DDRAM of 10M into a RAM disk,mount to PC and visit over USB port. source
Dataflash Read and write DataFlash source
RTC Describes how to use the RTC source
sdmmc Read ane write SD card or Micro SD card source
usb_device_core Describes how to enumerate USB examples, and initialize  UDP port source
usb_device_hid_transfer Implements a USB device HID transfer examples source
 
Software resources in Operating systems
OS Item Features Description
Linux2.6.30   u-boot Boot start-up system
Tftp Support tftp transport protocols
File system Support updata yaffs file system to nand flash
Kernel Support updata kernel to nand flash
Kernel parameter support configration kernel parameter
Kernel version Linux kernel 2.6.13
file system ROM/CRAM/EXT2/FAT32/NFS/YAFFS
Drivers
 		 UART, Ethernet, RTC, USB, LEDs, Touch Panel, SD/MMC Card, Sound, etc.
Network Transport Protocol and Application TCP/IP whole TCP/IP transport protocols
File transmission (FTP Client/server)
Telnet Telnet protocol
Web servers Web network server
Wince 6.0 Bootloader stepldr load Eboot and run Eboot
Eboot Support updata system by USB port
Drivers Drivers UART, Ethernet, USB OHCI, UsB Device, RTC, Buttons, LCD, Audio, SD/MMC Card,etc.
 
  Download
 
Ducuments Size Download Date
EB-SAM9G45 Eval Board User manual 1.19 MB May 27, 2010
EB-SAM9G45 Eval Board Schematic 282 KB May 27, 2010
WinCE User Manual for SAM9G45 Board 2.49 MB Apr 21, 2011
Linux User Manual for SAM9G45 Board 229 KB Apr 21, 2011
AT91SAM9G45 Datasheet 17.83 MB May 27, 2010
Android for EB-SAM9G45 4.3"LCD 41.48 MB May 12, 2011
 
  Purchase
 
Product Name Part# Price Package List
EB-SAM9G45 Evaluation Board EB-SAM9G45 320 USD 1x EB-SAM954G evaluate board
1x IDC10 cable
1x DB9 to IDC10 cable
1x A/B type USB cable
1x Ethernet cable
1x 12V，1.25A power adaper
1x 4.3 inches QVGA 480x272 LCD panel with resistive touch screen
1x CD-ROM, including system resources，tools, user manual)
 
   * Optional
Product Part# Price Description
ATMEL MBC-SAM9G45 Core Board MBC-SAM9G45 100 USD Based on ATMEL AT91SAM9G45, with 4MB DataFlash, 256MB NandFlash, 64KB EEPROM and 128MB DDR2 SDRAM, measuring only 45mm x 52mm.