| |
| |
|
The EB-SAM3S4C Board is an ARM embedded evaluation board produced by Embest, integrates the ATMEL SAM3S4C which is based on high performance 32-Bit Cortex-M3 RISC processor .The ATMEL SAM3S4C operate at up to 64 MHz and features 256 KBytes of Flash and 48Kbytes of SRAM memory. The SAM3S4C periphery set includes a full speed USB Device port with embedded tansceiver, a High Speed MCI for SDIO/SD/MMC, External bus Interface with NandFlash controller,2xUsart,2xUart,2xTwi, 3xSPI,an I2S, as well as 1 PWM timer,6x 16-bit timers, an RTC, a 12-bit ADC,a 12-bit DAC and a Analog comparator.
In addition, there are plenty of demo codes in the CD for this board, these examples will save your much time to construct your own development environment.
|
| |
Hardware Features |
| |
- CPU: ATMEL SAM3S4C, based on Cortex-M3 Core, 60MHz
- 256KB Flash & 48KB SRAM
- 4Gb NANDFLASH (extension)
- One TFT LCD interface
- Three key-presses
- 36 I/O pins extension interface
- One Jtag/SW debug Interface
- RTC with back-up battery
- One IIS audio input interface
- One IIS audio output interface
- One MIC interface
|
- Two power supply methods: 5V DC, USB
- Two five-wire UART interface
- One USB Device interface
- One ADC interface
- Two BNC interfaces
- Three LEDs
- Micro SD Card interface
- Dimension: 135mmx90mm
|
|
| |
Software Features (Source Code in MDK) |
| |
| Items |
Descriptions |
Delivery |
| Nandflash |
Read , write and eraseNandFlash |
Source |
| USART |
Test the USART Communicate with the PC |
Source |
| USART_RS485 |
Test the USART In rs485 mode |
Source |
| UART |
Using the UART to communicate with the PC via Hyper Terminal |
Source |
| SPI_Touchscreen |
Touchscreen calibration |
Source |
| LCD Driver |
Used to display picture and character in LCD |
Source |
| NandFlash Driver |
Write, read or erase NandFlash |
Source |
| LED |
Use keys to control LED blinking |
Source |
| ADC12 |
Test ADC Module |
Source |
| FATFS_NandFlash |
Build a file system on the NandFlash |
Source |
| CM3_BIT_BANDING |
Test Bit band function |
Source |
| DAC12-SinWave |
Output a sinewave. |
Source |
| EFFC_uniqueid |
Displays the Unique ID stored in the Flash with EFFC module. |
Source |
| PWM_PDC |
Config the three PWM Channels |
Source |
| RTC |
Test RTC module |
Source |
| RTT |
Test the RTT module |
Source |
| OS |
Embeded OS RTX and uCosII-2.52 |
Source |
| TIM Driver |
Demonstrate the use of the TC peripheral |
Source |
| usb_audio_headphone |
Transfer the Audia data by using the USB |
Source |
| usb_cdc_serial |
USB Vitrual serial port function |
Source |
| USB_HID_Keyboard |
USB Keyboard Test |
Source |
| USB_Massstorage |
Demonstrate the use of the USART peripheral |
Source |
| USB Driver |
Make NandFlash as storage device |
Source |
|
| |
Technical Data |
Main Processor
|
ATMEL SAM3S4C, based on Cortex-M3 Core, 60MHz |
| Memory Space |
256KB Flash & 48KB SRAM
4Gb NANDFLASH (extension)
1Mb PSRAM (extension) |
| Power Supply |
5V DC, 210mA typical, 320mA maximum |
| XTAL Frequency |
12MHz |
| Size & Weight |
135mm x 90mm (5.3" x 3.5"), 1.5 lb |
| Peripherals |
1 x RTC with back-up battery
1 x 36 I/O pins extension interface
1 x IIS I/O interface
1 x MIC interface
1 x 20 pins JTAG interface
1 x five-wire UART interface
1 x USB Device interface
1 x SD Card interface
1 x TFT LCD interface
1 x ADC interface
2 x BNC interfaces
3 x LEDs
3 x Key-presses |
|
Block diagram
 |
| |
Schematics |

Contact us for more details |
| |
| |
Download |
| |
| Documentations |
Size |
Download |
Date |
| EM-SAM3S4C User Manual |
947 KB |
 |
Jan 20, 2011 |
| EM-SAM3S4C Examples Projects for Keil MDK-ARM |
1.87 MB |
 |
Jan 20, 2011 |
| EM-SAM3S4CDatasheets for LCD Panel |
1.14 MB |
 |
Jan 20, 2011 |
| EM-SAM3S4C Datasheets for Peripheral Devices |
2.98 MB |
 |
Jan 20, 2011 |
| Atmel SAM3S4C Cortex-M3 Processor Datasheet |
20 MB |
 |
Jan 20, 2011 |
| Atmel SAM3S4C Cortex-M3 Processor Summary |
1.36 MB |
 |
Jan 20, 2011 |
|
| |
Purchase |
| |
| Product Name |
Part# |
Price |
Package List |
| SAM3S4C Evaluation Board |
EB-SAM3S4C |
$120USD |
1 x SAM3S4C Evaluation Board
1 x RS-232 Serial Cable
1 x USB Cable
1 x 2.8" TFT LCD Panel with touchscreen |
|
| |
| * Optional |
| Product |
Part# |
Price |
Package List |
| CD-ROM |
-- |
-- |
The CD-ROM of EB-SAM3S4C Board |
|