Search
Name
Keyword
Part#
Price -
 
    

HomeProductsEvaluation BoardsSAM3 series


More...		  

 EB-SAM3S4C ARM Cortex-M3 board

        
  Part#: EB-SAM3S4C Count: 0
  U/P(US$): 130   In Stock Accept OEM/ODM
  
  Overview
The EB-SAM3S4C Board is an ARM embedded evaluation board produced by Embest, integrates the ATMEL SAM3S4C which is based on high performance 32-Bit Cortex-M3 RISC processor .The ATMEL SAM3S4C operate at up to 64 MHz and features 256 KBytes of Flash and 48Kbytes of SRAM memory. The SAM3S4C periphery set includes a full speed USB Device port with embedded tansceiver, a High Speed MCI for SDIO/SD/MMC, External bus Interface with NandFlash controller,2xUsart,2xUart,2xTwi, 3xSPI,an I2S, as well as 1 PWM timer,6x 16-bit timers, an RTC, a 12-bit ADC,a 12-bit DAC and a Analog comparator.

     In addition, there are plenty of demo codes in the CD for this board, these examples will save your much time to construct your own development environment.
 
  Hardware Features
 
  • CPU: ATSAM3S4C, based on Cortex-M3 Core, 60MHz
  • 256KB Flash & 48KB SRAM
  • 4Gb NANDFLASH (extension)
  • One TFT LCD interface
  • Three key-presses
  • 36 I/O pins extension interface
  • One Jtag/SW debug Interface
  • RTC with back-up battery
  • One IIS audio input interface
  • One IIS audio output interface
  • One MIC interface
  • Two power supply methods: 5V DC, USB
  • Two five-wire UART interface
  • One USB Device interface
  • One ADC interface
  • Two BNC interfaces
  • Three LEDs
  • Micro SD Card interface
  • Dimension: 135mmx90mm
 
 Software Features
 
Items Descriptions Delivery
Nandflash Read , write and eraseNandFlash Source
USART Test the USART Communicate with the PC Source
usart_rs485 Test the USART In rs485 mode Source
UART Using the UART to communicate with the PC via Hyper Terminal Source
LCD Touchscreen calibration Source
SPI_Touchscreen Used to display picture and character in LCD Source
Led_Controller Write, read or erase NandFlash Source
ADC12 Use keys to control LED blinking  Source
fatfs_nandflash Test ADC Module Source
cm3_bit_banding Build a file system on the NandFlash Source
CRCCU Test Bit band function Source
dac12-sinewave Output a sinewave. Source
effc_uniqueid Displays the Unique ID stored in the Flash with EFFC module. Source
pmc_clock_switching Config the three PWM Channels Source
pwm_pdc Test RTC module Source
RTC Test the RTT module Source
RTT Embeded OS RTX and uCosII-2.52 Source
OS Demonstrate the use of the TC peripheral Source
usb_audio_headphone Transfer the Audia data by using the USB Source
usb_cdc_serial USB Vitrual serial port function Source
usb_hid_keyboard USB Keyboard Test Source
usb_massstorage Demonstrate the use of the USART peripheral Source
USB Driver Make NandFlash as storage device Source
 
 
Technical Data
Main Processor
 ATSAM3S4C, based on Cortex-M3 Core, 60MHz
Memory Space 256KB Flash & 48KB SRAM
4Gb NANDFLASH (extension)
1Mb PSRAM (extension)
Power Supply 5V DC, 210mA typical, 320mA maximum
XTAL Frequency 12MHz
Size & Weight 135mm x 90mm (5.3" x 3.5"), 1.5 lb
Peripherals 1 x RTC with back-up battery
1 x 36 I/O pins extension interface
1 x IIS I/O interface
1 x MIC interface
1 x 20 pins JTAG interface
1 x five-wire UART interface
1 x USB Device interface
1 x SD Card interface
1 x TFT LCD interface
1 x ADC interface
2 x BNC interfaces
3 x LEDs
3 x Key-presses
 
  Block Diagram
 
 
  Schematics
 
 
  Download
 
Documentations Size Download Date
EB-SAM3S4C User Manual 1.03 MB Jan 27, 2011
ATSAM3S4C Cortex-M3 Processor Datasheet 23.13 MB Jan 27, 2011
 
  Purchase
 
Product Name Part# Price Package List
SAM3S4C Evaluation Board EB-SAM3S4C $120 USD 1 x SAM3S4C Evaluation Board
1 x RS-232 Serial Cable
1 x USB Cable
1 x 2.8" TFT LCD Panel with touchscreen
 
   * Optional
Product Part# Price Package List
CD-ROM -- -- The CD-ROM of EB-SAM3S4C Board